Installing a Brick Paver Walkway or Garden Bricks

Making use of Setting up a Brick Paver Walkway or White Bricks or Pavers to develop a walkway or patio complements a home in a manner in which is unrivaled. It includes a level of quality and sophistication to a house entryway that can not be attained with either concrete or asphalt. Brick and Pavers likewise can be found in various colors and shapes permitting for special color plans and patterns to be attained. In addition, setting up a Brick or Paver sidewalk does not always need a pro. With some fundamental understanding and a fairly easy pathway plan, a property owner is capable of undertaking such a task.

The secret to installing a Brick or Paver Walkway is to first effectively prepare the location where the bricks/pavers are to be set up. The area ought to be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines ought to be strung on each side of the walkway. The string lines suggest the completed height of the walkway.
As soon as the area has been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipe or journal board the length of the pathway on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your walkway border and aid to maintain the integrity and shape of the sidewalk.

The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again assist maintain the integrity of the walkway.

Inevitably bricks/pavers will need to be cut or split when building the sidewalk. To actually cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and load down strongly.
Spread stone dust over the brand-new pathway and sweep into the fractures. Repeat this procedure a number of times to ensure the fractures are completely filled. This will complete the interlocking of the bricks and assist to eliminate any weed growth. Simply include grass seed to the outside edges and you must have a beautiful entryway to your home within a couple of weeks.


In addition, setting up a Brick or Paver pathway does not always require a pro. The key to setting up a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, position a 1" pipe or ledger board the length of the walkway on either side of the sidewalk. These strips will act as your sidewalk border and help to preserve the check here stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or split when building the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Garden Bricks”

Leave a Reply

Gravatar